Non drying adhesive three sided labeling machine with enlarged rubber roller

Release time：2023-05-05 17:40

1、 Machine composition:

A: Host:

750W Panasonic small inertia servo motor, Panasonic servo amplifier, Danfoss frequency converter, Panasonic motor,

Siemens programmable logic controller (PLC) from Germany, HITECH color human-machine interface (bilingual operation interface in Chinese and English),

German SICK label sensor (for ordinary label labeling).

Japanese KEYENCE FS-V11 product detection photoelectric switch,

B: Mechanical part:

Conveying mechanism: Taiwan imported AC motor 750W, Danfoss frequency converter speed regulation.

Bottle guide mechanism: stainless steel guide rail with dual coordinate adjustment.

Bottle splitting mechanism: Panasonic motor, variable frequency speed regulation.

Integral mechanism: Panasonic motor, frequency converter speed regulation, synchronized with the conveying mechanism.

Compression mechanism: Spiral bevel gear transmission, mechanically synchronized with the conveying mechanism.

Scraping mechanism: sponge spring steel plate combination, Teflon sticker.

Label pressing mechanism 1: Combination type unpowered sea roller, which can be quickly disassembled to adapt to different sizes of labels.

2、 Performance characteristics of ENKB-07 labeling machine:

A: The host adopts two technologies from our company:

1) Double pressure roller labeling is beneficial for improving labeling accuracy

Due to the active roller rolling of the label before labeling, it is beneficial to eliminate label wrinkles, improve labeling quality, and reach the end of the last label.

2) A two-stage swing rod spring type label delivery clutch, with an additional belt brake, achieves constant tension label delivery.

B: Explanation of local performance:

1) Due to the adoption of multiple technologies and the high-performance execution component - small inertia servo motor, the system uses a professional programmable controller from Siemens in Germany to control the servo motor in a closed-loop manner. The friendly human-machine interface system is used to achieve human-machine dialogue. The host can achieve an accuracy level of 0.01 meters per minute in the control process of marking speed, instead of the typical machine's 1 meter per minute, In this regard alone, this machine has improved two accuracy levels; In terms of speed, this machine adopts a 750W Panasonic high-power small inertia servo motor, and the marking speed can be adjusted in any numerical range between 0.5-40 meters/minute to match the production speed of the customer's production line, thus achieving true high-speed labeling.

C: Comparison of performance between labeling machines and several other models:

1) This labeling machine uses a small inertia servo motor, while most labeling machines still use a stepper motor.

2) This labeling machine adopts PLC control instead of ordinary microcontroller control.

3) The human-machine interface of this labeling machine is truly digital control, rather than a simple display function.

D: Conveying mechanism: imported AC motor, frequency converter for speed regulation.

A high-power AC motor, coupled with a large capacity frequency converter for speed regulation, ensures stable bottle delivery speed and improves labeling accuracy; During the labeling process of this machine, the position of the photoelectric switch for measuring objects can be adjusted to achieve zero delay. Therefore, this machine can achieve zero spacing labeling and improve the labeling speed. In the past, most labeling machines used the photoelectric switch for measuring objects to remain stationary and adopted delay control. That is, when the photoelectric switch for measuring objects sends a signal, the system delays the labeling. However, if there is a change in the system voltage or the load of the conveying mechanism during this process, Then there will be a deviation in the labeling position of the label.

E: Labeling agency:

The labeling head can be adjusted in 8-dimensional space, and the labeling angle can be adjusted arbitrarily, making it easy to paste various transparent labels;

Elastic scraper, unpowered sponge roller compression, secondary compression of powered sponge roller, ensuring no bubble generation;

The mechanical structure of the entire machine adopts a reinforced rigid design, which is simple and stable.

3、 Applicable scope:

1. This machine is a three sided labeling machine, suitable for labeling the three sides of the product;

2. Can quickly change different bottle specifications, easy to operate, neat, beautiful, clean, and easy to clean;

3. Suitable for double-sided labeling of flat bottles, square bottles, and other products in various industries, such as daily chemical, petroleum, engine oil, washing products, food, food and beverage, medicine, etc.

4、 Technical parameters:

380V  50 Hz  4000W

Labeling and labeling speed: 60 meters/minute

Labeling accuracy: ± 1mm

Diameter of label: 330 mm

Paper core diameter: 76.2 mm

Label width (i.e. elevation): 195mm

Overall size: L4000 * W1400 * H1650 (mm)

Net weight of the entire machine: 750 kg